TM Systems

Wet end exhaust: Reduce the humidity and heat load

by

wet endThe wet end of the paper machine produces most of the heat and moist air leaks into the machine hall. Thus the wet end exhaust plays a key role as far as the machine hall air flow dimensioning is considered.

[Read more…]

Heat recovery solutions: Lower energy consumption and higher productivity

by


Heat RecoveryTM Systems is very aware of the energy challenges and the pressure toward environment-friendly operations in different process industries. Therefore we have put extra effort to further develop energy saving solutions, including top of the line heat recovery systems. We deliver solutions that cut energy costs and enable more environmentally friendly production.
[Read more…]

Mondi Stambolijski Trim Handling: More efficiency needed, but no time for shut-down

by

Case: Mondi Stambolijski Bulgaria: Trim handling system for a winder.

Trim Handling System used in Stambolijski.
Typical Trimvac trim handling system

 

Goals

The customer’s trim conveying system was not efficient enough. The existing system was ejector-based. The winder was not able to run at full speed and the ejector air was blown to the pulper causing the area to become overpressurised. Additionally, the energy consumption was too high. [Read more…]

Ilim Group Bratsk Heat Recovery: Less energy loss in Siberian conditions

by

puristin 2Goals

Many leaks and lost energy in the old systems, how could we improve them? What is the right solution to minimize the losses considering the weather conditions range from -45 °C to +35 °C? Heat recovery.

[Read more…]

BillerudKorsnäs Skärblacka: PM9 Air system rebuild

by

Heat Recovery System

Case: BillerudKorsnäs, Skärblacka: PM9 air system rebuild.

Goals

The BillerudKorsnäs Skärblacka PM9 machine hall ventilation system needed updating. The amount of supply air was insufficient. The air balance and working conditions needed a new supply air system and a heat recovery system.

[Read more…]